[Feature request]: Smoothing #109
Assignees
Labels
duplicate
This issue or pull request already exists
Comments
sblantipodi
added a commit
that referenced
this issue
May 13, 2023
- ***Breaking changes***: requires `Glow Worm Luciferin` (v5.10.6) - **Added a [smoothing feature that is used to smooth the transitions from one color to another](https://github.com/sblantipodi/firefly_luciferin/wiki/Smoothing-color-transitions)**, this is particularly useful to reduce eye strain with contents that produces fast flashing like fast peaced games or similar. This setting can be controlled on the fly via [MQTT/Home Assistant](https://github.com/sblantipodi/firefly_luciferin/wiki/Home-Automation-configs). Closes [#80](#80) and [#109](#109). - **Added a [latency test](https://github.com/sblantipodi/firefly_luciferin/wiki/(DRAFT-this-feature-will-be-available-on-the-next-release)-Test-image-and-latency-test)**. This test displays colors in rapid succession and helps you check if the latency between the image shown on your monitor and the color displayed on the led strip is acceptable to you. Highering the framerate helps reducing the latency. You can run this test at 10 different speed. This is also useful when choosing the right smoothing level for your preferences. - **[Web Interface](https://github.com/sblantipodi/firefly_luciferin/wiki/Remote-Access#luciferin-web-interface) now displays an Auto save button**, if auto save is enabled, color and brightness information is stored into memory to retain this settings after reboot. Closes [#38](sblantipodi/glow_worm_luciferin#38). - Added an option within the [Web Interface](https://github.com/sblantipodi/firefly_luciferin/wiki/Remote-Access#luciferin-web-interface) to choose to **turn on the LEDs once the microcontroller boots up**. - **[Device reset](https://github.com/sblantipodi/firefly_luciferin/wiki/(DRAFT-this-feature-will-be-available-on-the-next-release)-Device-reset)** has been improved. Closes [#100](#100) and [#37](sblantipodi/glow_worm_luciferin#37). - **Added support for [RGB and BGR color order](https://github.com/sblantipodi/firefly_luciferin/wiki/RGB-and-RGBW-support)**. - **RGBW SK6812 performance boost**. +30% maximum framerate and reduced latency. - **[Added support for the QuinLED dig2go](https://github.com/sblantipodi/firefly_luciferin/wiki/Compatible-Hardware#pre-build-boards-support) pre-build board**. - Added support for **[Hardware Button](https://github.com/sblantipodi/firefly_luciferin/wiki/Hardware-Button)**. - Fixed an issue that prevented correct screen capture once changed the desired framerate or aspect ratio. - Minor UI improvements. - [Web Installer](https://sblantipodi.github.io/glow_worm_luciferin) now presents an option to install beta or previous version of the Glow Worm Luciferin firmware. - Improved [log level configurability](https://github.com/sblantipodi/firefly_luciferin/wiki/Debug). - Removed warnings in the Home Assistant logs. Closes [#111](#111). - [Arduino Bootstrapper](https://github.com/sblantipodi/arduino_bootstrapper/releases) update (v.1.14).
sblantipodi
added a commit
to sblantipodi/glow_worm_luciferin
that referenced
this issue
May 13, 2023
- ***Breaking changes***: requires `Firefly Luciferin` (v2.11.7) - **Added a [smoothing feature that is used to smooth the transitions from one color to another](https://github.com/sblantipodi/firefly_luciferin/wiki/Smoothing-color-transitions)**, this is particularly useful to reduce eye strain with contents that produces fast flashing like fast peaced games or similar. This setting can be controlled on the fly via [MQTT/Home Assistant](https://github.com/sblantipodi/firefly_luciferin/wiki/Home-Automation-configs). Closes [#80](sblantipodi/firefly_luciferin#80) and [#109](sblantipodi/firefly_luciferin#109). - **Added a [latency test](https://github.com/sblantipodi/firefly_luciferin/wiki/Test-image-and-latency-test)**. This test displays colors in rapid succession and helps you check if the latency between the image shown on your monitor and the color displayed on the led strip is acceptable to you. Highering the framerate helps reducing the latency. You can run this test at 10 different speed. This is also useful when choosing the right smoothing level for your preferences. - **[Web Interface](https://github.com/sblantipodi/firefly_luciferin/wiki/Remote-Access#luciferin-web-interface) now displays an Auto save button**, if auto save is enabled, color and brightness information is stored into memory to retain this settings after reboot. Closes [#38](#38). - Added an option within the [Web Interface](https://github.com/sblantipodi/firefly_luciferin/wiki/Remote-Access#luciferin-web-interface) to choose to **turn on the LEDs once the microcontroller boots up**. - **[Device reset](https://github.com/sblantipodi/firefly_luciferin/wiki/Device-reset)** has been improved. Closes [#100](sblantipodi/firefly_luciferin#100) and [#37](#37). - **Added support for [RGB and BGR color order](https://github.com/sblantipodi/firefly_luciferin/wiki/RGB-and-RGBW-support)**. - **RGBW SK6812 performance boost**. +30% maximum framerate and reduced latency. - **[Added support for the QuinLED dig2go](https://github.com/sblantipodi/firefly_luciferin/wiki/Compatible-Hardware#pre-build-boards-support) pre-build board**. - Added support for **[Hardware Button](https://github.com/sblantipodi/firefly_luciferin/wiki/Hardware-Button)**. - Fixed an issue that prevented correct screen capture once changed the desired framerate or aspect ratio. - Minor UI improvements. - [Web Installer](https://sblantipodi.github.io/glow_worm_luciferin) now presents an option to install beta or previous version of the Glow Worm Luciferin firmware. - Improved [log level configurability](https://github.com/sblantipodi/firefly_luciferin/wiki/Debug). - Removed warnings in the Home Assistant logs. Closes [#111](sblantipodi/firefly_luciferin#111). - [Arduino Bootstrapper](https://github.com/sblantipodi/arduino_bootstrapper/releases) update (v.1.14).
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Is your feature request related to a problem? Please describe
I would like to see a function to adjust the smoothing of the color change, as it is done in ambibox. Sometimes in games, when the color changes very quickly, very sharp unpleasant blinks occur on the side.
Describe the solution you'd like
No response
Describe alternatives you've considered
No response
The text was updated successfully, but these errors were encountered: