Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

[Feature request]: SSID/Password update #100

Closed
mittal07abhilash opened this issue Dec 28, 2022 · 1 comment · Fixed by #106 or sblantipodi/glow_worm_luciferin#49
Closed

[Feature request]: SSID/Password update #100

mittal07abhilash opened this issue Dec 28, 2022 · 1 comment · Fixed by #106 or sblantipodi/glow_worm_luciferin#49
Assignees
@sblantipodi
Labels
enhancement New feature or request feature request keep don't stale this issue

Comments

@mittal07abhilash
Copy link

Is your feature request related to a problem? Please describe

I recently changed the password of my WiFi for security reasons and I was unable to update the same for Glowworm Luciferin installed on a custom ESP8266 board since it does not have a micro-USB port (installed the firmware by soldering wire on to the ESP8266 12-E Chip and connecting them to a CP2102 USB to TTL USB UART Module).

Describe the solution you'd like

Since Gloowworm Luciferin is able to push firmware updates to the Firefly device through wireless communication, there must be a way to set SSID/password for the Firefly device to connect to the WiFI.

Describe alternatives you've considered

No response
@sblantipodi
Copy link
Owner

Hi, thanks for using Luciferin and for sharing new ideas.
password management is something that will be improved in the next future :)

@sblantipodi sblantipodi added feature request enhancement New feature or request keep don't stale this issue labels Dec 28, 2022
@sblantipodi sblantipodi mentioned this issue Mar 28, 2023
Merged
@sblantipodi sblantipodi mentioned this issue May 9, 2023
Merged
sblantipodi added a commit that referenced this issue May 13, 2023
@sblantipodi
Smoothing with frame insertion. (#106)
2a848b0 
- ***Breaking changes***: requires `Glow Worm Luciferin` (v5.10.6)  
- **Added a [smoothing feature that is used to smooth the transitions from one color to another](https://github.com/sblantipodi/firefly_luciferin/wiki/Smoothing-color-transitions)**,
this is particularly useful to reduce eye strain with contents that produces fast flashing like fast peaced games or similar. This setting can be controlled on the fly via [MQTT/Home Assistant](https://github.com/sblantipodi/firefly_luciferin/wiki/Home-Automation-configs). Closes [#80](#80) and [#109](#109). 
- **Added a [latency test](https://github.com/sblantipodi/firefly_luciferin/wiki/(DRAFT-this-feature-will-be-available-on-the-next-release)-Test-image-and-latency-test)**. This test displays colors in rapid succession and helps you check if the latency between the image shown on your monitor and the color displayed on the led strip is acceptable to you. Highering the framerate helps reducing the latency. You can run this test at 10 different speed. This is also useful when choosing the right smoothing level for your preferences.
- **[Web Interface](https://github.com/sblantipodi/firefly_luciferin/wiki/Remote-Access#luciferin-web-interface) now displays an Auto save button**, if auto save is enabled, color and brightness information is stored into memory to retain this settings after reboot. Closes [#38](sblantipodi/glow_worm_luciferin#38).
- Added an option within the [Web Interface](https://github.com/sblantipodi/firefly_luciferin/wiki/Remote-Access#luciferin-web-interface) to choose to **turn on the LEDs once the microcontroller boots up**.
- **[Device reset](https://github.com/sblantipodi/firefly_luciferin/wiki/(DRAFT-this-feature-will-be-available-on-the-next-release)-Device-reset)** has been improved. Closes [#100](#100) and [#37](sblantipodi/glow_worm_luciferin#37). 
- **Added support for [RGB and BGR color order](https://github.com/sblantipodi/firefly_luciferin/wiki/RGB-and-RGBW-support)**. 
- **RGBW SK6812 performance boost**. +30% maximum framerate and reduced latency.
- **[Added support for the QuinLED dig2go](https://github.com/sblantipodi/firefly_luciferin/wiki/Compatible-Hardware#pre-build-boards-support) pre-build board**.
- Added support for **[Hardware Button](https://github.com/sblantipodi/firefly_luciferin/wiki/Hardware-Button)**.
- Fixed an issue that prevented correct screen capture once changed the desired framerate or aspect ratio.
- Minor UI improvements.
- [Web Installer](https://sblantipodi.github.io/glow_worm_luciferin) now presents an option to install beta or previous version of the Glow Worm Luciferin firmware.
- Improved [log level configurability](https://github.com/sblantipodi/firefly_luciferin/wiki/Debug).
- Removed warnings in the Home Assistant logs. Closes [#111](#111).
- [Arduino Bootstrapper](https://github.com/sblantipodi/arduino_bootstrapper/releases) update (v.1.14).
sblantipodi added a commit to sblantipodi/glow_worm_luciferin that referenced this issue May 13, 2023
@sblantipodi
Smoothing with frame insertion. (#49)
6c3184d 
- ***Breaking changes***: requires `Firefly Luciferin` (v2.11.7)
- **Added a [smoothing feature that is used to smooth the transitions from one color to another](https://github.com/sblantipodi/firefly_luciferin/wiki/Smoothing-color-transitions)**,
this is particularly useful to reduce eye strain with contents that produces fast flashing like fast peaced games or similar. This setting can be controlled on the fly via [MQTT/Home Assistant](https://github.com/sblantipodi/firefly_luciferin/wiki/Home-Automation-configs). Closes [#80](sblantipodi/firefly_luciferin#80) and [#109](sblantipodi/firefly_luciferin#109). 
- **Added a [latency test](https://github.com/sblantipodi/firefly_luciferin/wiki/Test-image-and-latency-test)**. This test displays colors in rapid succession and helps you check if the latency between the image shown on your monitor and the color displayed on the led strip is acceptable to you. Highering the framerate helps reducing the latency. You can run this test at 10 different speed. This is also useful when choosing the right smoothing level for your preferences.
- **[Web Interface](https://github.com/sblantipodi/firefly_luciferin/wiki/Remote-Access#luciferin-web-interface) now displays an Auto save button**, if auto save is enabled, color and brightness information is stored into memory to retain this settings after reboot. Closes [#38](#38).
- Added an option within the [Web Interface](https://github.com/sblantipodi/firefly_luciferin/wiki/Remote-Access#luciferin-web-interface) to choose to **turn on the LEDs once the microcontroller boots up**.
- **[Device reset](https://github.com/sblantipodi/firefly_luciferin/wiki/Device-reset)** has been improved. Closes [#100](sblantipodi/firefly_luciferin#100) and [#37](#37). 
- **Added support for [RGB and BGR color order](https://github.com/sblantipodi/firefly_luciferin/wiki/RGB-and-RGBW-support)**. 
- **RGBW SK6812 performance boost**. +30% maximum framerate and reduced latency.
- **[Added support for the QuinLED dig2go](https://github.com/sblantipodi/firefly_luciferin/wiki/Compatible-Hardware#pre-build-boards-support) pre-build board**.
- Added support for **[Hardware Button](https://github.com/sblantipodi/firefly_luciferin/wiki/Hardware-Button)**.
- Fixed an issue that prevented correct screen capture once changed the desired framerate or aspect ratio.
- Minor UI improvements.
- [Web Installer](https://sblantipodi.github.io/glow_worm_luciferin) now presents an option to install beta or previous version of the Glow Worm Luciferin firmware.
- Improved [log level configurability](https://github.com/sblantipodi/firefly_luciferin/wiki/Debug).
- Removed warnings in the Home Assistant logs. Closes [#111](sblantipodi/firefly_luciferin#111).
- [Arduino Bootstrapper](https://github.com/sblantipodi/arduino_bootstrapper/releases) update (v.1.14).
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@sblantipodi sblantipodi

Labels
enhancement New feature or request feature request keep don't stale this issue
Projects
None yet
Milestone
No milestone
2 participants
@sblantipodi @mittal07abhilash