Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Please add profile for Creality Ender 3 S1 Plus #4669

Closed
1 task done
Gozania opened this issue Mar 23, 2024 · 119 comments · Fixed by #4674
Closed
1 task done

Please add profile for Creality Ender 3 S1 Plus #4669

Gozania opened this issue Mar 23, 2024 · 119 comments · Fixed by #4674
Labels
enhancement New feature or request

Comments

@Gozania
Copy link

Gozania commented Mar 23, 2024

Is there an existing issue for this feature request?

  • I have searched the existing issues

Is your feature request related to a problem?

The entire S1 line has been added except for the often left out S1 Plus.

Which printers will be beneficial to this feature?

All

Describe the solution you'd like

The entire S1 line has been added except for the often left out S1 Plus.

Describe alternatives you've considered

  1. I have modified a S1 Pro profile to have a print size of 300x300x300.

Additional context

No response
@Gozania Gozania added the enhancement New feature or request label Mar 23, 2024
@cochcoder
Copy link
Contributor

How well does the profile work when you edit the S1 Pro profile to have a print size of 300x300x300? Are there any values that should be changed for speed, acceleration, retraction, etc?

@vgdh
Copy link
Contributor

vgdh commented Mar 24, 2024

If the mechanical side of the printers is the same. You should be ok.

@cochcoder cochcoder mentioned this issue Mar 24, 2024
Merged
@cochcoder
Copy link
Contributor

cochcoder commented Mar 24, 2024 •
edited
Loading

@vgdh @Gozania Let me know if PR #4674 works for you, let me know if you need a download link

@Gozania
Copy link
Author

Gozania commented Mar 24, 2024

How well does the profile work when you edit the S1 Pro profile to have a print size of 300x300x300? Are there any values that should be changed for speed, acceleration, retraction, etc?

I havent printed anything with orca yet. Still in the process of moving print profiles & filaments over to Orca from Prusa. I know there is a script that does this, but I'm hesitant due to my lack of CLI skills. If something goes wrong, I wont know how to recover.

@cochcoder
Copy link
Contributor

What is the script called/located? Also if you can run a test print with the PR I created to make sure that everything works, that would be awesome!

@Gozania
Copy link
Author

Gozania commented Mar 24, 2024

@vgdh @Gozania Let me know if PR #4674 works for you, let me know if you need a download link

I just tried to import the creality.json file, but it did not take.
Screenshot 2024-03-24 103756

Screenshot 2024-03-24 103821

@Gozania
Copy link
Author

Gozania commented Mar 24, 2024 via email

@cochcoder
Copy link
Contributor

I just tried to import the creality.json file, but it did not take.

That won't work as there are 14 other files that were added/changed, here are a few download links for what main would be once merged: Windows portable, Linux Appimage, Mac Arm, and Mac x64

@Gozania
Copy link
Author

Gozania commented Mar 24, 2024

Not quite I understand what ya mean by "once main would be once merged" Please forgive the ignorance, I'm just a roughneck who enjoys CNC & lasers.... Do you mean if I am on the beta version instead of 1.9.1 my printer will be there? I poked around in the windows mobile zip & found the S1 Plus 0.4 Json and tried to import that, but still no dice. Same error window as before.

I do appreciate ya trying to help me out.

@cochcoder
Copy link
Contributor

Because of the way that the program is setup I am 98% sure that you can't copy the .json file as you would have to also compile the software. What you need to do is to extract the Windows portable.zip and run orcaslicer.exe, which should show the Ender-3 S1 Plus. I don't recommend using this version of OrcaSlicer on a day to day biases due to still being developed. You'll see the Ender-3 S1 Plus in the stable release once that comes out and my PR has been merged.

@Gozania
Copy link
Author

Gozania commented Mar 24, 2024 via email

@cochcoder
Copy link
Contributor

Gotcha, so if I wanted to see the printer now, I would just run the portable app through a "container"

Yes, that is correct

Will continue to use prusa

That is fine, however if you or @vgdh can do a test print with this new profile that would be greatly appreciated so that I can fix any simple issues that might arise when you or someone else uses this profile.

@cochcoder
Copy link
Contributor

I changed a few things: Windows portable

@Gozania
Copy link
Author

Gozania commented Mar 24, 2024 via email

@cochcoder
Copy link
Contributor

Side note... I only checked the box for .4 nozzle, but it added all the nozzle sizes. Also the bed is model & texture is off. It is looking like a standard S1/E3v2 rather than a S1 Plus. The bed on the S1 Plus is exactly like this & is PC than PEI https://www.amazon.com/Ender-Frosted-Magnetic-Flexible-310x315mm/dp/B0B8HDRSYF/ref=sr_1_1?crid=1XEAG8YC8NGSW&dib=eyJ2IjoiMSJ9.mXQZtPbjqthoaGM6ok7ZoAxkmKsWXODYOe_bMxPeWLuDKfmu_9xMQmwTyM1FeBJpPcpfJ-XkCAkvSnRveOjrkkxV4CeYUJQ3BadtZ1jo0xMa3BYtiaoAPm0ZylyJyUmlTXIQSZXMvC4MEEONhuaKih-5t8ifR3eXaaKx8X_6RCuY-bcIm2oucr6AVd1L3mpjTvJd0Rsd1FKRIrFA4sdrmTtULWQxX5PI3ajJrfAus-c.SYd5tWdRJD-lODMaXqLhtuFgTtEQg7Xh0cxEh-xr5_w&dib_tag=se&keywords=s1+plus+bed&qid=1711324329&sprefix=s1+plus+be%2Caps%2C176&sr=8-1

Thx, I'll look into it, I think I fixed the issue with all four nozzles being added with only one chosen.

It would be even better if you a 300x300 border can be added outside the bed grid to show limits.

Do you mean fixing the bed model/texture?

@Gozania
Copy link
Author

Gozania commented Mar 25, 2024 via email

@cochcoder
Copy link
Contributor

Yes the bed model/texture. Prusa used to have an exact replica, but dissapeared somehow. I made my own less desirable one using a CR10 model & ender 3 texture. Does the job, but Prusa's initial one was much better.

How does the Ender-3 V3 SE bed model/texture look?
Screenshot_20240324_203639

@Gozania
Copy link
Author

Gozania commented Mar 25, 2024 via email

@Gozania
Copy link
Author

Gozania commented Mar 25, 2024 via email

@Gozania
Copy link
Author

Gozania commented Mar 25, 2024 via email

@Gozania
Copy link
Author

Gozania commented Mar 25, 2024 via email

@cochcoder
Copy link
Contributor

I am currently compiling a new version of the software and hopefully, it fixes all the issues you found so far

@Gozania
Copy link
Author

Gozania commented Mar 25, 2024 via email

@cochcoder
Copy link
Contributor

Where did my original string go wrong in orca?

It may be the ".gcode" string at the end, I don't know much when it comes to that area of the slicer, I recommend asking around if you don't find a solution. Also, the Bed Mesh leveling may not happen when you start a print as I just found that issue and it takes around 40 minutes for the code to recompile.

@Gozania
Copy link
Author

Gozania commented Mar 25, 2024 via email

@Gozania
Copy link
Author

Gozania commented Mar 25, 2024 via email

@cochcoder
Copy link
Contributor

One thing that would be MASSIVELY helpful is a search function like PS. It comes in soooo handy to find the setting you want.

Orca Slicer does have a search function, although it is broken up into three different setting locations. I'll keep it in mind though, might add an overall search function if I get time ;)

@Gozania
Copy link
Author

Gozania commented Mar 25, 2024 via email

@cochcoder
Copy link
Contributor

Do you want z-hop to only work on the top surfaces?

@Gozania
Copy link
Author

Gozania commented Mar 27, 2024 via email

@Gozania
Copy link
Author

Gozania commented Mar 27, 2024 via email

@cochcoder
Copy link
Contributor

I usually keep it turned off for the most part, however there are times when I do need to enable it. I usually set an above & below, but a simple check box for top surfaces only (regardless of layer height i.e. 3 separate tops at different heights would all have zhop on for that layer, but then turned off after that layer has been cleared by the nozzle.)

I'll add it into the profile, also there is a drop down checkbox in the main printer profile that allows you to change were z-hop is used.

@Gozania
Copy link
Author

Gozania commented Mar 27, 2024 via email

@cochcoder
Copy link
Contributor

However I do feel it should remain OFF by default.

I'll do that instead

@Gozania
Copy link
Author

Gozania commented Mar 27, 2024 via email

@cochcoder
Copy link
Contributor

My only MAJOR gripe thus far is that I am unable to edit my travel acceleration to my desired rate. Its kinda like, its my machine let me do what I want especially if its within machine limits.

So, to change your machine's max travel acceleration in the slicer, you need to have Marlin 2 on your printer. However, as you have Klipper installed, you need to make sure that your G-Code flavor is Klipper and you then can edit the travel acceleration under the speed tab once you set the value of "Normal Printing" acceleration. Klipper handles the maximum acceleration in the printer.cfg file.

@cochcoder
Copy link
Contributor

Benchy is done, other than the forementioned issues. The print turned out great! Should give a newb a great baseline and able to get a quality print straight away without tweeking anything.

Great! I should have a new version that I can give you tomorrow before I mark the PR as ready to be merged. This new version should change retraction/detraction speed, and retraction length, and hopefully disable z_hop. I'll work with SoftFever or someone else to fix the weird bed texture/model issues.

@Gozania
Copy link
Author

Gozania commented Mar 27, 2024 via email

@Gozania
Copy link
Author

Gozania commented Mar 27, 2024 via email

@cochcoder
Copy link
Contributor

One last bug I did notice... in the device area, If I went full screen cam mode I could not get it normal size again either by clicking the screen arrow icon (dunno what its called) or by pressing esc. I only got out of it by clicking my klipper logo.

Strange, hopefully, this gets fixed soon.

Let me know if you still get the error of all nozzle versions being added when you only select one in this new version

@Gozania
Copy link
Author

Gozania commented Mar 27, 2024 via email

@cochcoder
Copy link
Contributor

I think that'll be best to limit any possible issues, make sure to make a backup of any profiles you made so they don't get lost.

@Gozania
Copy link
Author

Gozania commented Mar 27, 2024 via email

@Gozania
Copy link
Author

Gozania commented Mar 27, 2024 via email

@cochcoder
Copy link
Contributor

Oh yea, lol, you can still take pictures if that would help you. The export bug should hopefully be fixed before the stable release of 2.0

@cochcoder
Copy link
Contributor

I can copy/replace the file if you can provide a path.

I don't recommend that as when ever I tried to do that the program ended up bugging out

@Gozania
Copy link
Author

Gozania commented Mar 27, 2024 via email

@Gozania
Copy link
Author

Gozania commented Mar 27, 2024 via email

@cochcoder
Copy link
Contributor

If they are based off the profiles that are being worked on, then yes. As you'll need to remove those profiles, which will most likely remove anything built off of them, before extracting and trying the new version.

@cochcoder
Copy link
Contributor

However there is a weird step like artifact in the upper left

That is part of the original model that I sized up for some reason. It shouldn't be noticeable once I get the texture working.

@Gozania
Copy link
Author

Gozania commented Mar 27, 2024 via email

@cochcoder
Copy link
Contributor

The unfortunate ordeals of a development build 😔

@Gozania
Copy link
Author

Gozania commented Mar 27, 2024 via email

@cochcoder
Copy link
Contributor

I'm gonna be stepping away for a bit as I have to deal with some credit card fraud commited against me.... Be back in touch in a bit.

Take all the time you need! Get that money!

@Gozania
Copy link
Author

Gozania commented Mar 27, 2024 via email

@cochcoder
Copy link
Contributor

Ok, I think I fixed all the remaining issues. It should be ready to merge after I do one last check! Thank you for all of your help!

@Gozania
Copy link
Author

Gozania commented Mar 28, 2024 via email

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
enhancement New feature or request
Projects
None yet
Milestone
No milestone
Development

Successfully merging a pull request may close this issue.

Add Creality Ender-3 S1 Plus cochcoder/OrcaSlicer
3 participants
@vgdh @Gozania @cochcoder