-
-
Notifications
You must be signed in to change notification settings - Fork 963
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Add Creality Ender-3 S1 Plus (#4674)
* Add Creality Ender-3 S1 Plus * Misc * Fix nozzle_diameter * Add printer_variant value * Change build plate model/texture to use Ender-3 V3 SE * Enable mesh leveling * Up max travel acceleration to 5000 * Enable infill_combination * Add Draft profiles * Change buildplate model/texture * Fix build plate model * Add retraction & detraction speed & change retraction length * Add filament_ to the beginning * Revert retraction & detraction speed & retraction length * Tests Trying to change retract and detract speed as well as retraction length Also trying to have Z-hop only happen on top layers * Apply new values to other nozzles * disable z_hop * Lower build plate model * Resolve merge conflicts * temporarily remove Ender-3 S1 Plus * Re-add Ender-3 S1 Plus
- Loading branch information
Showing
24 changed files
with
1,857 additions
and
1 deletion.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Loading
Sorry, something went wrong. Reload?
Sorry, we cannot display this file.
Sorry, this file is invalid so it cannot be displayed.
Binary file added
BIN
+427 KB
resources/profiles/Creality/creality_ender3s1plus_buildplate_model.stl
Binary file not shown.
Binary file added
BIN
+2.87 KB
resources/profiles/Creality/creality_ender3s1plus_buildplate_texture.png
Loading
Sorry, something went wrong. Reload?
Sorry, we cannot display this file.
Sorry, this file is invalid so it cannot be displayed.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
117 changes: 117 additions & 0 deletions
117
resources/profiles/Creality/machine/Creality Ender-3 S1 Plus 0.2 nozzle.json
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,117 @@ | ||
| { | ||
| "type": "machine", | ||
| "setting_id": "GM001", | ||
| "name": "Creality Ender-3 S1 Plus 0.2 nozzle", | ||
| "from": "system", | ||
| "instantiation": "true", | ||
| "inherits": "fdm_creality_common", | ||
| "printer_model": "Creality Ender-3 S1 Plus", | ||
| "printer_variant": "0.2", | ||
| "printer_structure": "i3", | ||
| "default_print_profile": "0.20mm Standard @Creality Ender3S1Plus 0.2", | ||
| "nozzle_diameter": [ | ||
| "0.2" | ||
| ], | ||
| "printable_area": [ | ||
| "0x0", | ||
| "300x0", | ||
| "300x300", | ||
| "0x300" | ||
| ], | ||
| "printable_height": "300", | ||
| "nozzle_type": "undefine", | ||
| "auxiliary_fan": "0", | ||
| "machine_max_acceleration_extruding": [ | ||
| "500", | ||
| "500" | ||
| ], | ||
| "machine_max_acceleration_retracting": [ | ||
| "1000", | ||
| "1000" | ||
| ], | ||
| "machine_max_acceleration_travel": [ | ||
| "5000", | ||
| "5000" | ||
| ], | ||
| "machine_max_acceleration_x": [ | ||
| "500", | ||
| "500" | ||
| ], | ||
| "machine_max_acceleration_y": [ | ||
| "500", | ||
| "500" | ||
| ], | ||
| "machine_max_acceleration_z": [ | ||
| "100", | ||
| "100" | ||
| ], | ||
| "machine_max_speed_e": [ | ||
| "60", | ||
| "60" | ||
| ], | ||
| "machine_max_speed_x": [ | ||
| "500", | ||
| "500" | ||
| ], | ||
| "machine_max_speed_y": [ | ||
| "500", | ||
| "500" | ||
| ], | ||
| "machine_max_speed_z": [ | ||
| "10", | ||
| "10" | ||
| ], | ||
| "machine_max_jerk_e": [ | ||
| "5", | ||
| "5" | ||
| ], | ||
| "machine_max_jerk_x": [ | ||
| "8", | ||
| "8" | ||
| ], | ||
| "machine_max_jerk_y": [ | ||
| "8", | ||
| "8" | ||
| ], | ||
| "machine_max_jerk_z": [ | ||
| "0.4", | ||
| "0.4" | ||
| ], | ||
| "max_layer_height": [ | ||
| "0.36" | ||
| ], | ||
| "min_layer_height": [ | ||
| "0.08" | ||
| ], | ||
| "printer_settings_id": "Creality", | ||
| "retraction_minimum_travel": [ | ||
| "1" | ||
| ], | ||
| "retract_before_wipe": [ | ||
| "0%" | ||
| ], | ||
| "retraction_length": [ | ||
| "0.4" | ||
| ], | ||
| "retract_length_toolchange": [ | ||
| "1" | ||
| ], | ||
| "retraction_speed": [ | ||
| "45" | ||
| ], | ||
| "deretraction_speed": [ | ||
| "45" | ||
| ], | ||
| "z_hop": [ | ||
| "0" | ||
| ], | ||
| "single_extruder_multi_material": "1", | ||
| "change_filament_gcode": "M600", | ||
| "machine_pause_gcode": "M25", | ||
| "default_filament_profile": [ | ||
| "Creality Generic PLA" | ||
| ], | ||
| "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling \nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0", | ||
| "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", | ||
| "scan_first_layer": "0" | ||
| } |
117 changes: 117 additions & 0 deletions
117
resources/profiles/Creality/machine/Creality Ender-3 S1 Plus 0.4 nozzle.json
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,117 @@ | ||
| { | ||
| "type": "machine", | ||
| "setting_id": "GM001", | ||
| "name": "Creality Ender-3 S1 Plus 0.4 nozzle", | ||
| "from": "system", | ||
| "instantiation": "true", | ||
| "inherits": "fdm_creality_common", | ||
| "printer_model": "Creality Ender-3 S1 Plus", | ||
| "printer_variant": "0.4", | ||
| "printer_structure": "i3", | ||
| "default_print_profile": "0.20mm Standard @Creality Ender3S1Plus 0.4", | ||
| "nozzle_diameter": [ | ||
| "0.4" | ||
| ], | ||
| "printable_area": [ | ||
| "0x0", | ||
| "300x0", | ||
| "300x300", | ||
| "0x300" | ||
| ], | ||
| "printable_height": "300", | ||
| "nozzle_type": "undefine", | ||
| "auxiliary_fan": "0", | ||
| "machine_max_acceleration_extruding": [ | ||
| "500", | ||
| "500" | ||
| ], | ||
| "machine_max_acceleration_retracting": [ | ||
| "1000", | ||
| "1000" | ||
| ], | ||
| "machine_max_acceleration_travel": [ | ||
| "5000", | ||
| "5000" | ||
| ], | ||
| "machine_max_acceleration_x": [ | ||
| "500", | ||
| "500" | ||
| ], | ||
| "machine_max_acceleration_y": [ | ||
| "500", | ||
| "500" | ||
| ], | ||
| "machine_max_acceleration_z": [ | ||
| "100", | ||
| "100" | ||
| ], | ||
| "machine_max_speed_e": [ | ||
| "60", | ||
| "60" | ||
| ], | ||
| "machine_max_speed_x": [ | ||
| "500", | ||
| "500" | ||
| ], | ||
| "machine_max_speed_y": [ | ||
| "500", | ||
| "500" | ||
| ], | ||
| "machine_max_speed_z": [ | ||
| "10", | ||
| "10" | ||
| ], | ||
| "machine_max_jerk_e": [ | ||
| "5", | ||
| "5" | ||
| ], | ||
| "machine_max_jerk_x": [ | ||
| "8", | ||
| "8" | ||
| ], | ||
| "machine_max_jerk_y": [ | ||
| "8", | ||
| "8" | ||
| ], | ||
| "machine_max_jerk_z": [ | ||
| "0.4", | ||
| "0.4" | ||
| ], | ||
| "max_layer_height": [ | ||
| "0.36" | ||
| ], | ||
| "min_layer_height": [ | ||
| "0.08" | ||
| ], | ||
| "printer_settings_id": "Creality", | ||
| "retraction_minimum_travel": [ | ||
| "1" | ||
| ], | ||
| "retract_before_wipe": [ | ||
| "0%" | ||
| ], | ||
| "retraction_length": [ | ||
| "0.4" | ||
| ], | ||
| "retract_length_toolchange": [ | ||
| "1" | ||
| ], | ||
| "retraction_speed": [ | ||
| "45" | ||
| ], | ||
| "deretraction_speed": [ | ||
| "45" | ||
| ], | ||
| "z_hop": [ | ||
| "0" | ||
| ], | ||
| "single_extruder_multi_material": "1", | ||
| "change_filament_gcode": "M600", | ||
| "machine_pause_gcode": "M25", | ||
| "default_filament_profile": [ | ||
| "Creality Generic PLA" | ||
| ], | ||
| "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0", | ||
| "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", | ||
| "scan_first_layer": "0" | ||
| } |
Oops, something went wrong.