diff --git a/resources/profiles/Kingroon.json b/resources/profiles/Kingroon.json index 099668cd668..90896d3e621 100644 --- a/resources/profiles/Kingroon.json +++ b/resources/profiles/Kingroon.json @@ -13,9 +13,17 @@ "name": "Kingroon KP3S PRO V2", "sub_path": "machine/Kingroon KP3S PRO V2.json" }, - { + { "name": "Kingroon KP3S 3.0", "sub_path": "machine/Kingroon KP3S 3.0.json" + }, + { + "name": "Kingroon KP3S V1", + "sub_path": "machine/Kingroon KP3S V1.json" + }, + { + "name": "Kingroon KLP1", + "sub_path": "machine/Kingroon KLP1.json" } ], "process_list": [ @@ -42,6 +50,18 @@ { "name": "0.30mm Standard @Kingroon KP3S 3.0", "sub_path": "process/0.30mm Standard @Kingroon KP3S 3.0.json" + }, + { + "name": "0.20mm Standard @Kingroon KP3S V1", + "sub_path": "process/0.20mm Standard @Kingroon KP3S V1.json" + }, + { + "name": "0.12mm Standard @Kingroon KLP1", + "sub_path": "process/0.12mm Standard @Kingroon KLP1.json" + }, + { + "name": "0.20mm Standard @Kingroon KLP1", + "sub_path": "process/0.20mm Standard @Kingroon KLP1.json" } ], "filament_list": [ @@ -142,6 +162,10 @@ { "name": "Kingroon KP3S 0.4 nozzle", "sub_path": "machine/Kingroon KP3S 3.0 0.4 nozzle.json" + }, + { + "name": "Kingroon KLP1 0.4 nozzle", + "sub_path": "machine/Kingroon KLP1 0.4 nozzle.json" } ] } diff --git a/resources/profiles/Kingroon/Kingroon KLP1_cover.png b/resources/profiles/Kingroon/Kingroon KLP1_cover.png new file mode 100644 index 00000000000..5fb71eb9b97 Binary files /dev/null and b/resources/profiles/Kingroon/Kingroon KLP1_cover.png differ diff --git a/resources/profiles/Kingroon/Kingroon KP3S V1_cover.png b/resources/profiles/Kingroon/Kingroon KP3S V1_cover.png new file mode 100644 index 00000000000..d6a50e207b9 Binary files /dev/null and b/resources/profiles/Kingroon/Kingroon KP3S V1_cover.png differ diff --git a/resources/profiles/Kingroon/filament/Kingroon Generic ABS.json b/resources/profiles/Kingroon/filament/Kingroon Generic ABS.json index 5e11d9665fe..73911af68b3 100644 --- a/resources/profiles/Kingroon/filament/Kingroon Generic ABS.json +++ b/resources/profiles/Kingroon/filament/Kingroon Generic ABS.json @@ -13,6 +13,8 @@ "12" ], "compatible_printers": [ + "Kingroon KLP1 0.4 nozzle", + "Kingroon KP3S V1 0.4 nozzle", "Kingroon KP3S PRO S1 0.4 nozzle", "Kingroon KP3S PRO V2 0.4 nozzle", "Kingroon KP3S 3.0 0.4 nozzle" diff --git a/resources/profiles/Kingroon/filament/Kingroon Generic ASA.json b/resources/profiles/Kingroon/filament/Kingroon Generic ASA.json index 2231d6a9f39..b06c5b8ee62 100644 --- a/resources/profiles/Kingroon/filament/Kingroon Generic ASA.json +++ b/resources/profiles/Kingroon/filament/Kingroon Generic ASA.json @@ -13,6 +13,8 @@ "12" ], "compatible_printers": [ + "Kingroon KLP1 0.4 nozzle", + "Kingroon KP3S V1 0.4 nozzle", "Kingroon KP3S PRO S1 0.4 nozzle", "Kingroon KP3S PRO V2 0.4 nozzle", "Kingroon KP3S 3.0 0.4 nozzle" diff --git a/resources/profiles/Kingroon/filament/Kingroon Generic PA-CF.json b/resources/profiles/Kingroon/filament/Kingroon Generic PA-CF.json index eac58e6a01f..8eef1a8c69c 100644 --- a/resources/profiles/Kingroon/filament/Kingroon Generic PA-CF.json +++ b/resources/profiles/Kingroon/filament/Kingroon Generic PA-CF.json @@ -19,8 +19,10 @@ "8" ], "compatible_printers": [ + "Kingroon KLP1 0.4 nozzle", + "Kingroon KP3S V1 0.4 nozzle", "Kingroon KP3S PRO S1 0.4 nozzle", "Kingroon KP3S PRO V2 0.4 nozzle", "Kingroon KP3S 3.0 0.4 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Kingroon/filament/Kingroon Generic PA.json b/resources/profiles/Kingroon/filament/Kingroon Generic PA.json index 00e4ee4680b..07d73558d3d 100644 --- a/resources/profiles/Kingroon/filament/Kingroon Generic PA.json +++ b/resources/profiles/Kingroon/filament/Kingroon Generic PA.json @@ -16,8 +16,10 @@ "12" ], "compatible_printers": [ + "Kingroon KLP1 0.4 nozzle", + "Kingroon KP3S V1 0.4 nozzle", "Kingroon KP3S PRO S1 0.4 nozzle", "Kingroon KP3S PRO V2 0.4 nozzle", "Kingroon KP3S 3.0 0.4 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Kingroon/filament/Kingroon Generic PC.json b/resources/profiles/Kingroon/filament/Kingroon Generic PC.json index 14378164dc7..f40641125f4 100644 --- a/resources/profiles/Kingroon/filament/Kingroon Generic PC.json +++ b/resources/profiles/Kingroon/filament/Kingroon Generic PC.json @@ -13,8 +13,10 @@ "0.94" ], "compatible_printers": [ + "Kingroon KLP1 0.4 nozzle", + "Kingroon KP3S V1 0.4 nozzle", "Kingroon KP3S PRO S1 0.4 nozzle", "Kingroon KP3S PRO V2 0.4 nozzle", "Kingroon KP3S 3.0 0.4 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Kingroon/filament/Kingroon Generic PETG.json b/resources/profiles/Kingroon/filament/Kingroon Generic PETG.json index d63d8fac21f..281aae4af33 100644 --- a/resources/profiles/Kingroon/filament/Kingroon Generic PETG.json +++ b/resources/profiles/Kingroon/filament/Kingroon Generic PETG.json @@ -43,6 +43,8 @@ "; filament start gcode\n" ], "compatible_printers": [ + "Kingroon KLP1 0.4 nozzle", + "Kingroon KP3S V1 0.4 nozzle", "Kingroon KP3S PRO S1 0.4 nozzle", "Kingroon KP3S PRO V2 0.4 nozzle", "Kingroon KP3S 3.0 0.4 nozzle" diff --git a/resources/profiles/Kingroon/filament/Kingroon Generic PLA-CF.json b/resources/profiles/Kingroon/filament/Kingroon Generic PLA-CF.json index d96b58a6c80..43b20cd38ee 100644 --- a/resources/profiles/Kingroon/filament/Kingroon Generic PLA-CF.json +++ b/resources/profiles/Kingroon/filament/Kingroon Generic PLA-CF.json @@ -19,8 +19,10 @@ "7" ], "compatible_printers": [ + "Kingroon KLP1 0.4 nozzle", + "Kingroon KP3S V1 0.4 nozzle", "Kingroon KP3S PRO S1 0.4 nozzle", "Kingroon KP3S PRO V2 0.4 nozzle", "Kingroon KP3S 3.0 0.4 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Kingroon/filament/Kingroon Generic PLA.json b/resources/profiles/Kingroon/filament/Kingroon Generic PLA.json index e4b457bce74..df234d7e054 100644 --- a/resources/profiles/Kingroon/filament/Kingroon Generic PLA.json +++ b/resources/profiles/Kingroon/filament/Kingroon Generic PLA.json @@ -7,6 +7,8 @@ "instantiation": "true", "inherits": "fdm_filament_pla", "compatible_printers": [ + "Kingroon KLP1 0.4 nozzle", + "Kingroon KP3S V1 0.4 nozzle", "Kingroon KP3S PRO S1 0.4 nozzle", "Kingroon KP3S PRO V2 0.4 nozzle", "Kingroon KP3S 3.0 0.4 nozzle" diff --git a/resources/profiles/Kingroon/filament/Kingroon Generic PVA.json b/resources/profiles/Kingroon/filament/Kingroon Generic PVA.json index 63e253dcf91..1cb99ecb5d1 100644 --- a/resources/profiles/Kingroon/filament/Kingroon Generic PVA.json +++ b/resources/profiles/Kingroon/filament/Kingroon Generic PVA.json @@ -19,6 +19,8 @@ "10" ], "compatible_printers": [ + "Kingroon KLP1 0.4 nozzle", + "Kingroon KP3S V1 0.4 nozzle", "Kingroon KP3S PRO S1 0.4 nozzle", "Kingroon KP3S PRO V2 0.4 nozzle", "Kingroon KP3S 3.0 0.4 nozzle" diff --git a/resources/profiles/Kingroon/filament/Kingroon Generic TPU.json b/resources/profiles/Kingroon/filament/Kingroon Generic TPU.json index 8c07c5871f2..7908828470b 100644 --- a/resources/profiles/Kingroon/filament/Kingroon Generic TPU.json +++ b/resources/profiles/Kingroon/filament/Kingroon Generic TPU.json @@ -10,6 +10,8 @@ "3.2" ], "compatible_printers": [ + "Kingroon KLP1 0.4 nozzle", + "Kingroon KP3S V1 0.4 nozzle", "Kingroon KP3S PRO S1 0.4 nozzle", "Kingroon KP3S PRO V2 0.4 nozzle", "Kingroon KP3S 3.0 0.4 nozzle" diff --git a/resources/profiles/Kingroon/machine/Kingroon KLP1 0.4 nozzle.json b/resources/profiles/Kingroon/machine/Kingroon KLP1 0.4 nozzle.json new file mode 100644 index 00000000000..84d12a50c14 --- /dev/null +++ b/resources/profiles/Kingroon/machine/Kingroon KLP1 0.4 nozzle.json @@ -0,0 +1,61 @@ +{ + "type": "machine", + "setting_id": "GM003", + "name": "Kingroon KLP1 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "Kingroon KLP1", + "default_filament_profile": "Kingroon Generic PLA", + "default_print_profile": "0.20mm Standard @Kingroon KLP1", + + "thumbnails": [ "100x100" ], + "change_filament_gcode": "", + "deretraction_speed": [ "90" ], + "enable_filament_ramming": "1", + "extra_loading_move": "-2", + "extruder_clearance_height_to_rod": "36", + "extruder_clearance_radius": "65", + "high_current_on_filament_swap": "0", + "machine_unload_filament_time": "0", + "min_layer_height": "0.08", + "parking_pos_retraction": "92", + "purge_in_prime_tower": "1", + "retract_lift_above": [ "0" ], + "retract_lift_below": [ "0" ], + "retract_lift_enforce": ["All Surfaces"], + "bed_exclude_area": ["0x0"], + "extruder_colour": ["#FCE94F"], + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "machine_end_gcode": "G91; relative positioning\n G1 Z1.0 F3000 ; move z up little to prevent scratching of print\n G90; absolute positioning\n G1 X0 Y200 F1000 ; prepare for part removal\n M104 S0; turn off extruder\n M140 S0 ; turn off bed\n G1 X0 Y200 F1000 ; prepare for part removal\n M84 ; disable motors\n M106 S0 ; turn off fan", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["5000", "20000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["9000", "9000"], + "machine_max_acceleration_x": ["10000", "20000"], + "machine_max_acceleration_y": ["10000", "20000"], + "machine_max_acceleration_z": ["500", "200"], + "machine_max_jerk_e": ["2.5", "2.5"], + "machine_max_jerk_x": ["20", "9"], + "machine_max_jerk_y": ["20", "9"], + "machine_max_jerk_z": ["0.2", "0.4"], + "machine_max_speed_e": ["100", "25"], + "machine_max_speed_z": ["50", "12"], + "machine_pause_gcode": "PAUSE", + "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG28 ; h1ome all axes\n M117 ;Purge extruder\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface\n G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\n G1 X2 Y175.0 Z0.3 F1500.0 E15 ; draw 1st line\n G1 X2 Y175.0 Z0.4 F5000.0 ; move to side a little\n G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface", + "max_layer_height": ["0.32"], + "retraction_length": ["1"], + "retraction_speed": ["90"], + "use_firmware_retraction": "0", + "wipe": ["1"], + "z_hop": ["0"], + "printable_area": [ + "0x0", + "230x0", + "230x230", + "0x230" +], +"printable_height": "210", +"nozzle_diameter": ["0.4"] +} diff --git a/resources/profiles/Kingroon/machine/Kingroon KLP1.json b/resources/profiles/Kingroon/machine/Kingroon KLP1.json new file mode 100644 index 00000000000..2e0964289d0 --- /dev/null +++ b/resources/profiles/Kingroon/machine/Kingroon KLP1.json @@ -0,0 +1,10 @@ +{ + "type": "machine_model", + "name": "Kingroon KLP1", + "model_id": "Kingroon KLP1", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Kingroon", + "hotend_model": "", + "default_materials": "Kingroon Generic ABS;Kingroon Generic PLA;Kingroon Generic PLA-CF;Kingroon Generic PETG;Kingroon Generic TPU;Kingroon Generic ASA;Kingroon Generic PC;Kingroon Generic PVA;Kingroon Generic PA;Kingroon Generic PA-CF" +} diff --git a/resources/profiles/Kingroon/machine/Kingroon KP3S V1 0.4 nozzle.json b/resources/profiles/Kingroon/machine/Kingroon KP3S V1 0.4 nozzle.json new file mode 100644 index 00000000000..e836c3e08eb --- /dev/null +++ b/resources/profiles/Kingroon/machine/Kingroon KP3S V1 0.4 nozzle.json @@ -0,0 +1,85 @@ +{ + "type": "machine", + "setting_id": "GM003", + "name": "Kingroon KP3S V1 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "Kingroon KP3S V1", + "default_filament_profile": "Kingroon Generic PLA", + "default_print_profile": "0.20mm Standard @Kingroon KP3S V1", + + "thumbnails": [ "100x100" ], + "change_filament_gcode": "", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "deretraction_speed": [ "30" ], + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "head_wrap_detect_zone": [], + "enable_long_retraction_when_cut": "0", + "long_retractions_when_cut": [ + "0" + ], + "retract_before_wipe": [ "0%" ], + "retraction_distances_when_cut": [ + "18" + ], + "extra_loading_move": "0", + "extruder_clearance_height_to_rod": "36", + "extruder_clearance_radius": "65", + "high_current_on_filament_swap": "0", + "machine_unload_filament_time": "0", + "min_layer_height": "0.08", + "parking_pos_retraction": "0", + "preferred_orientation": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_lift_above": [ "0" ], + "retract_lift_below": [ "0" ], + "retract_lift_enforce": ["All Surfaces"], + "bed_exclude_area": ["0x0"], + "extruder_colour": ["#FCE94F"], + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "machine_end_gcode": "G91; relative positioning\n G1 Z1.0 F3000 ; move z up little to prevent scratching of print\n G90; absolute positioning\n G1 X0 Y180 F1000 ; prepare for part removal\n M104 S0; turn off extruder\n M140 S0 ; turn off bed\n G1 X0 Y180 F1000 ; prepare for part removal\n M84 ; disable motors\n M106 S0 ; turn off fan", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "20000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["10000", "20000"], + "machine_max_acceleration_y": ["10000", "20000"], + "machine_max_acceleration_z": ["500", "200"], + "machine_max_jerk_e": ["2.5", "2.5"], + "machine_max_jerk_x": ["9", "9"], + "machine_max_jerk_y": ["9", "9"], + "machine_max_jerk_z": ["0.2", "0.4"], + "machine_max_speed_e": ["100", "25"], + "machine_max_speed_z": ["12", "12"], + "machine_pause_gcode": "PAUSE", + "machine_start_gcode": "M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nM83\nG28 ; h1ome all axes\nG1 Z0.2 ; lift nozzle a bit \nG92 E0 \nG1 Y-3 F2400 \nG1 X50 F2400 ; zero the extruded length \nG1 X115 E40 F500 ; Extrude 25mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-0.2 F3000 ; Retract a little \nG1 X180 F4000 ; Quickly wipe away from the filament line\nM117", + "manual_filament_change": "0", + "nozzle_height": "4", + "nozzle_type": "brass", + "max_layer_height": ["0.32"], + "retraction_length": ["0.8"], + "retraction_speed": ["30"], + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "0", + "use_firmware_retraction": "0", + "wipe": ["1"], + "z_hop": ["0"], + "z_offset": "0", + "printable_area": [ + "0x0", + "180x0", + "180x180", + "0x180" +], +"printable_height": "180", +"nozzle_diameter": ["0.4"] +} diff --git a/resources/profiles/Kingroon/machine/Kingroon KP3S V1.json b/resources/profiles/Kingroon/machine/Kingroon KP3S V1.json new file mode 100644 index 00000000000..9b92571019f --- /dev/null +++ b/resources/profiles/Kingroon/machine/Kingroon KP3S V1.json @@ -0,0 +1,10 @@ +{ + "type": "machine_model", + "name": "Kingroon KP3S V1", + "model_id": "Kingroon KP3S V1", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Kingroon", + "hotend_model": "", + "default_materials": "Kingroon Generic ABS;Kingroon Generic PLA;Kingroon Generic PLA-CF;Kingroon Generic PETG;Kingroon Generic TPU;Kingroon Generic ASA;Kingroon Generic PC;Kingroon Generic PVA;Kingroon Generic PA;Kingroon Generic PA-CF" +} diff --git a/resources/profiles/Kingroon/process/0.12mm Standard @Kingroon KLP1.json b/resources/profiles/Kingroon/process/0.12mm Standard @Kingroon KLP1.json new file mode 100644 index 00000000000..cbbabc20178 --- /dev/null +++ b/resources/profiles/Kingroon/process/0.12mm Standard @Kingroon KLP1.json @@ -0,0 +1,13 @@ +{ + "type": "process", + "compatible_printers": [ + "Kingroon KLP1 0.4 nozzle" + ], + "compatible_printers_condition": "", + "inherits": "fdm_process_common", + "name": "0.12mm Standard @Kingroon KLP1", + "initial_layer_print_height": "0.2", + "layer_height": "0.12", + "line_width": "0.4", + "instantiation": "true" +} diff --git a/resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KLP1.json b/resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KLP1.json new file mode 100644 index 00000000000..02e8d9219d7 --- /dev/null +++ b/resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KLP1.json @@ -0,0 +1,13 @@ +{ + "type": "process", + "compatible_printers": [ + "Kingroon KLP1 0.4 nozzle" + ], + "compatible_printers_condition": "", + "inherits": "fdm_process_common", + "name": "0.20mm Standard @Kingroon KLP1", + "initial_layer_print_height": "0.2", + "layer_height": "0.2", + "line_width": "0.42", + "instantiation": "true" +} diff --git a/resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KP3S V1.json b/resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KP3S V1.json new file mode 100644 index 00000000000..fde94f47417 --- /dev/null +++ b/resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KP3S V1.json @@ -0,0 +1,45 @@ +{ + "type": "process", + "compatible_printers": [ + "Kingroon KP3S V1 0.4 nozzle" + ], + "inherits": "fdm_process_common", + "name": "0.20mm Standard @Kingroon KP3S V1", + "instantiation": "true", + "bottom_shell_layers": "2", + "bridge_speed": "30", + "brim_type": "no_brim", + "default_acceleration": "10000", + "detect_thin_wall": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": "60", + "infill_wall_overlap": "8%", + "initial_layer_print_height": "0.25", + "initial_layer_travel_speed": "200", + "internal_solid_infill_acceleration": "6000", + "internal_solid_infill_speed": "160", + "is_custom_defined": "0", + "outer_wall_acceleration": "4000", + "overhang_2_4_speed": "30", + "overhang_reverse": "1", + "overhang_reverse_internal_only": "1", + "overhang_reverse_threshold": "0%", + "overhang_speed_classic": "1", + "seam_gap": "0.1", + "seam_position": "back", + "slow_down_layers": "2", + "slowdown_for_curled_perimeters": "1", + "sparse_infill_acceleration": "6000", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "300", + "support_type": "normal(manual)", + "thick_bridges": "1", + "top_surface_acceleration": "5000", + "top_surface_speed": "180", + "travel_acceleration": "10000", + "version": "1.6.0.0", + "wall_generator": "classic", + "wall_loops": "2", + "wall_transition_angle": "25", + "xy_hole_compensation": "0.1" +}